PAINTING & DRYWALL TOOLS

Texture Sprayer w/Hopper


	Image for reference only Actual item may look different Click on image for larger view

Quantity:

Additional Information

* 1.5 GALLON HOPPER
* The rotary vane compressor delivers 6.2 CFM free air at 25 PSI
* 50' AIR HOSE
WHAT THE PATTERN PISTOL WILL APPLY -
In general, it will apply any sprayable material that will feed through the hopper by gravity and will go through one of the orifices. If there is any doubt whether you can spray a specific material, get a bag and try it before you go on the job.
HOW TO ESTABLISH YOU PATTERN -
You can change the texture applied by the Pattern Pistol by adjusting these four things:
Size of the orifice and orifice opening - controlled on gun.
Trigger Setting - controlled on gun.
Amount of air pressure - controlled with compressor.
Mix consistency - controlled with mixing equipment.
Size of the orifice: The Pattern Pistol has a circular orifice disc attached to the gun. You can select any one of five orifice sizes: 7/32", 1/4", 5/16", 1/8" and 7/16". To change orifice, pull the trigger back at least 1/8"; rotate the disc to position the orifice you want to use; then tighten the thumbscrew finger tight. It is not necessary to use pliers to tighten the orifice disc. The size of the orifice you use depends on the size of the aggregate in your mix. It is not necessary to disconnect the air hose to refill the hopper. Releasing the trigger stops the flow of material immediately.
To change Air Stem Openings: A small wrench is provided. It is not necessary to take your Pattern Pistol apart. Simply turn the orifice plate to the to the largest opening, and use the small socket tools supplied to remove the air orifice from the air stem.
Mix consistency: Follow the manufactures instruction when mixing materials. If you have trouble, call your material salesman or distributor.
HOW TO CLEAN THE PATTERN PISTOL -
Clean both gun and hopper with clean water.

Also check the following item(s) related to the above:

Dry Wall Mud Mixer

* Please call us with any questions about our texture sprayer w/hopper rentals, serving Provo Utah, Orem, American Fork, Pleasant Grove, Lehi and the Provo-Orem Metro Area.